Instrument interfaces
Pipe Organ/Player Piano
Perforator Control

Computer interfaces
Parallel Port
Serial Port
Game Port

Miscellaneous
 MIDI to Long Wire
 Poster

Software
Drivers
UMx Setup & Shareware

Links

 


MIDIator Systems
(858) 481-1663


 

Perforator Drivers


The PD1 ($480.00 to $530.00) is a controller board capable of driving up to 104/128 large coils, which make up the perforator machine.

 

PD1 perforator driver

The PD1 is a controller board capable of driving up to 104/128 large coils, which make up the perforator machine. It connects to the PC with its parallel printer port.

  • compatible with Wayne Stahnke's Punch software (freeware from author)
  • connects to printer port of PC
  • 104 to 128 optically isolated outputs drive 50 volts, 2 amps (4 amps if modulated)
  • direct connections for a 6 or 8 wires unipolar stepper motor, with separate power
  • solid state relay for main motor
  • outputs switch to the negative of the solenoid power supply, (common positive)
  • output duty cycle control to reduce power during hold: after the solenoid has accomplished its move with full power, the current is reduced to 25% (adjustable). This feature can be disabled.
  • catch diode on every output to the positive of the solenoid power supply
  • trigger switch input, optically isolated, can be disabled

 

SPECIFICATIONS

  Minimum Maximum
Logic voltage 9 volts 25 volts
Solenoid voltage   50 volts
Stepper motor voltage   25 volts
Output current - continuous   2 amps
Output current - 50% duty cycle   4 amps
Output current - 25% duty cycle   8 amps
Power relay current   5 amps
Power relay voltage   240 volts AC

Included

  • PD1 driver board
  • 6 ft data cable
  • 8 DB-25 female solder connectors
  • Software disk

Accessories

  • AD-9 power supply

Prices

PD1-104

480.00

PD1-128

530.00

AD-9 10.00

.

Configurations:

  • 104 - 104 outputs
  • 128 - 128 outputs

.
Please Note: All pricing in US Dollars.